A Developing Story: Jama Connect Helps Össur Improve the Mobility of Millions

Jama Software

Ossur uses Jama for Medical Device Development

In medical device development, control of quality and risk is heavily driven by regulatory requirements. Compliance with international medical device standards like ISO 13485 and ISO 14971 can drain resources and reduce operational agility if the means of demonstrating compliance are not agile themselves.

The more complex the project, the higher the risk. And the higher the risk, the more stringent the medical device compliance procedures. Managing hundreds of requirements in a document-based system without traceability becomes a major chore.

Össur, a global leader in non-invasive orthopedics, had for several years been relying on an internally developed document-based process to manage its product requirements. While their system had been working as intended, they felt there was an opportunity to streamline procedures and compliance tasks.

Read our eBook to learn more about risk management for Class II and Class III medical device development.

The Costs of a Rigid Requirements System in Medical Device Development

Continually evolving its processes has always been a key to success for Össur, whose cutting-edge prosthetics technologies have been showcased in publications like Popular Science and have been worn in competition in the Olympic Games. They examined their development cycle for inefficiencies and noted their requirements process unfolded in a sequential manner that was costing them an enormous amount of time and effort.

In specifying a highly complex Össur medical device, several engineers would collaborate on drafting requirements and compiling the requirements document. The document would then be circulated for review. Once approved, the requirements would be verified. If any requirement needed to be added or changed, however, the entire review and approval cycle had to be repeated.

“Our old system was very rigid,” said David Langlois, Director of R&D for Bionic Solutions at Össur. “The minimum effort was always quite high, which means the overhead was also high.”

Össur knew it was time for a change. They wanted something that was as close to a turn-key solution as possible — one that would provide traceability and dynamic content management, and would be scalable across their organization. Plus, it needed to be capable of handling the complete development chain — from requirements through verification and validation, along with easing the path to compliance to ISO standards like ISO 13485 and ISO 14971 — for a diverse product line.

After evaluating several alternatives, including some designed specifically for medical device development, Össur chose Jama Connect™.

 Learn more about how Jama Connect helps teams improve medical device development.

Replacing Process Rigidity with Speed and Agility

Össur began using Jama Connect in 2018, starting with a small group of developers working on bionic lower-limb prosthetics. They immediately began seeing dramatic improvements in their process, especially in the areas of traceability, impact analysis, and test management.

As soon as they began importing their data into Jama Connect, Össur’s engineers saw they had traceability gaps. “Catching these gaps would probably have taken hours or days in our old system,” says Langlois. “With Jama, it became obvious in a matter of minutes.”

With Jama Connect’s impact analysis, teams can quickly gain an accurate understanding of the implications of a proposed change. So, in turn, they can make better informed business decisions. “That brings a lot of value when you’re trying to run a review, and you want to know whether you have gaps in your test coverage,” says Langlois. “With Jama, it’s a five-minute question instead of one that takes hours.”

In addition, Össur feels Jama Connect’s test coverage and built-in metrics are making its testing process far more predictable and efficient. “One thing that’s very powerful about Jama Connect is that, after a few test runs, you can actually quantify pretty accurately what sort of effort is required,” Langlois says. “Jama provides all these metrics that allow you to identify where your bottlenecks are, giving you a better understanding of where the time is going and where you’re losing money.”

Leveraging Jama Connect’s Flexibility for a Faster, More Flexible Future

As Össur branches Jama out into other areas of its organization, it plans to allow individual teams to configure Jama Connect in a way that best suits how they work. And Össur is already thinking about ways to integrate with some of the other solutions it’s currently using.

“As a software developer, I think Jama Connect’s integration with Jira is going to be very useful for me,” says Matthías Kristjánsson, Product Lead Designer at Össur. “Today, we actually make duplicates of our requirements into the Jira system. Being able to connect them straight to Jama and remove that step — so they’re directly connected to a requirement or specification — will be valuable.”

Read the full case study to learn more about how Össur is using Jama Connect to grow more agile and efficient and assure compliance with relevant regulatory standards.

Previous Video
Systems Engineering with Jama Connect
Systems Engineering with Jama Connect

Next Video
Enterprise Software Development Overview
Enterprise Software Development Overview


First Name
Last Name
Pending Opt-In
All fields are required. Your privacy is important to us.
Thank you!
Error - something went wrong!